Spring 24 Spring Back Banner Stand x-frame, KIT (hardware, soft bag and printed banner 24″w x 63″h)
“Spring 24” spring back x frame banner stand Kit: frame hardware, soft bag and printed banner 24″ wide x 63″ high.
The “Spring 24” is a stylish, economical banner stand which sets up easily and is priced so it's suitable for large volume purchases. It's simple 3-legged base spring back design effectively displays any banner which has grommet holes in the corners, by applying consistent tension on all four corners.
The spring back design of the Spring 24 means that you have to unroll the banner graphic and attach it onto the spring arms in order to set up the banner stand. But the set up is easy and doesn't require any tools. To display a banner, you simply slide "open" the base leg assembly, connect the top spring rods into the hub, then slip the grommet holes on each corner of the banner over the pins on each spring back arm and feet, then tighten the chrome finish thumb screws to lock the banner in place - and you're done!
The Spring 24 is ideal for customers who need to keep to tight budgets and require a stylish, simple, low cost banner stand for retail environments, hotel lobbys, restaurants. It's also great for volume purchases where you can economically get many of these stands set up in widespread retail locations for national programs.
It comes complete with a soft carry bag for storage and transportation (needs further protection for courier/plane shipping, though).
Please note that the Spring 24 can not be used with any Banner Lights.
- choose a banner that is either a digitally printed with eco-solvent inks or digitally dye sublimated with extended life dyes. Content can have any colours (including Pantone) for both foreground and background. Choose from five available banner material / print resolution options:
1) Printed Vinyl: medium resolution printed on low-curl 10 oz. matte vinyl material. This material may curl slightly, could have slight print banding visible with slightly less dense colours. It's not quite as spectacular looking as the upgrade choices, but it is a good economical option for limited use and tight budgets.
2) Printed Premium Ultra-Flat FR: high resolution printed on premium ultra-flat no curl and flame-retardant (meets fire code regulations) 10 oz. matte 100% recyclable material. This is like vinyl - only better. It has an awesome appearance with board straight ultra-flat sides, and the high res print produces vivid and accurate colours.
3) Non-Woven Textile: high resolution dyed on non-woven 130 gsm stay-flat, fray-free matte textile. This material gives a dimensional, slightly open weave, authentic look and is great when you want your message to stand out from the ordinary.
4) Polyester Knit FR Fabric: high resolution dyed on 220 gsm 100% polyester, NFPA701 flame resistant, wrinkle resistant fabric with sewn hems. This fabric gives a soft, flowing appearance that stands out in any display environment, and is also our standard fabric used for custom table covers.
Other Sizes Available:
Country of Origin:
Printed Banner: included in price (some material type and resolution choices are extra cost)