"Promo Flag" 10' Feather Shape Double-Sided Flying Banner Flag COMPLETE KIT
"Promo Flag" 10' feather shape double-sided flying banner flag COMPLETE KIT: includes the pole hardware for a 23.5" wide x 107.5" high display; double-sided (reads correctly on both sides) printed banner flag; and your choice of base: either the patent-pending ground sleeve or steel cross base floor/ground stand.
"Promo Flag" 10' Feather Shape Double-Sided Flying Banner Flag Display - Complete Kit: includes pole hardware for a 23.5" wide x 107.5" high display with your choice of ground sleeve or floor/ground stand, and double-sided printed banner (with any colours, logos or content you want).
"Promo Flag" 10' feather shape double-sided flying advertising banner flag complete kit is an excellent awareness and branding product for indoor or outdoor trade shows, special events or retail promotions. The Kit includes the frame hardware for a 10' total height advertising flag display with your choice of either the patent-pending ground sleeve or steel cross base floor/ground stand, double-sided (reads correctly from the back) fabric banner flag that is dye sublimation printed in full coverage and full colour with close to 100% colour penetration so it's bright and vibrant on both sides.
“Promo Flag" Portable Flying Banner Flags are an economical yet versatile portable flag display that displays an attention-getting flag virtually anywhere – indoors or outside! This lightweight, easy to assemble unit displays a printed fabric advertising or promotional flag (banner) which flies nicely in a gentle breeze and is supported for maximum visibility even when there’s no wind. The distinctive and attention-getting teardrop, feather, or rectangular shape of these flags makes them very effective for event branding and retail promotions - indoors or outdoors.
Product Item (SKU) #: PDpflag10-F+FFd-Kit "Promo Flag" 10 Foot Feather style Flying Banner with Double-Sided Printed Flag - Complete Kit: (including pole hardware with your choice of of ground sleeve or cross base floor (ground) stand, and double-sided printed banner (graphic design/layout/proofing not included - extra cost based on time required)
Banner Flag Material: - 100% polyester flag fabric
Style: - Feather shape
Graphics/Content: - double-sided custom printed banner flag (2 printed layers with opaque blockout liner in between) with any content / colours / coverage you require
- Graphic Visible Size when set up: 20" wide x 104.5" high (54 x 272 cm)
- Complete Display Size when set up: 23.5" wide x 107.5" high x 2" deep (60 x 273 x 4 cm, weight 13 lbs. (5.9 kg)
- Shipping Packaging Size: 49.5" wide x 4.25" high x 4.25" deep (126 x 10 x 10 cm)
- Available Finishes: black fiberglass frame
- Country of Origin: Frame Hardware - U.S. and Canada / Printed Flag - Canada
- Warranty: Banner stand hardware - 90 days / Flag - 1 year
“Promo Flag" Portable Flying Banner Flags are an economical yet versatile portable flag display that displays an attention-getting flag virtually anywhere – indoors or outside! This lightweight, easy to assemble unit displays a printed fabric advertising or promotional flag (banner) which is still supported for maximum visibility even when there’s no wind.
The distinctive and attention-getting teardrop, feather, or rectangular shape of these flags makes them very effective for event branding and retail promotions - indoors or outdoors.
When used outdoors, the gentle movement created by wind on the banner catches attention for maximum impact and it swivels freely in the wind. However, we caution that using double-sided models over 10' outdoors is not recommended as the extra weight put more wind stress on the frame and flag. This makes the flag sag more and may break the poles over time. If you choose to use it outdoors, Promo-Flag’s unique patent pending installation and removal system is second to none - it's extremely easy for the user and is hassle-free for landscapers and grounds maintenance while allowing the flag to freely swivel. This system allows for the fastest setup and take-down in the industry.
To set up just connect the three piece stacking pole together (poles are made of fiberglass and the base has an aluminum jacket for additional split resistance and greater durability). Then, insert the pole adaptor into the base of the pole and attach it to the flag using the small bungee (supplied). The flag is pulled tight to the bungee creating the bow at the top of the pole while the natural pull of the pole attempting to straighten keeps the bungee taut. For outdoor applications, drive the ground sleeve into the ground until the top is flush with the earth (this only has to be done once). Then just set the pole with adaptor into the sleeve of either the floor (ground) stand or the ground sleeve and you are done. The unique patent pending design of the ground sleeve lets you simply lift the flag (still on its pole) out of the sleeve overnight or when grass is being cut. Since the sleeve is just about flush with the ground level, mowers can go right over it without worry. A sleeve cap is also included which is slipped into the ground sleeve to make the sleeve easy to find and to keep rain and grass clippings from entering.
Many different flag sizes/shapes are available - either 6’, 10’, 12’ or 17’ high Feather shape; 5’, 9’, 10, or 15’ high Teardrop shape; or 9.5’or 13.5’ high rectangle shape. Your double-sided graphic on this model is permanently dyed into two layers of fabric with an opaque blockout liner sewn in between so there's no see-through or image ghosting and your graphic reads correctly from either side. Or you can choose a single-sided model printed only on one side of the flag (the image will read backwards from the other side of the flag). Note that single-sided flags are recommended for prolonged outdoor use as they “fly” better and the reduced wind load results in less stress on the fabric/stitching and pole assembly. All hems are professionally stitched and the pole pocket sleeve uses heavy duty double-stitched webbing for maximum durability to handle windy conditions (note:the flags should be taken indoors during periods of unusually strong winds).
Tight timing? No problem! Most Promo Flag orders are completed in about 7 business days (if you don't require design work), and RUSH SERVICE as fast as 72 Hours is also available. Customers usually need our Promo Flags ready to use at particular trade shows or events which happen on certain dates. We know how important these deadlines are and in over 20 years of business, we've almost never missed any. In fact, we've helped many customers who originally bought products from other suppliers and were told at the last minute that the order wouldn't be ready.
While some other flying feather banners are so-so, these Promo Flags are spectacular! The unique combination of just the right fabric, outstanding print quality and skilled professional sewing creates the most spectacular and durable advertising flags anywhere.
Only high quality fabric is used that is completely washable and ironable so there's no worries if (when) it gets a bit dirty!
With the digital dyeing process, the entire flag is completely dyed (both foreground and background are dyed) into white fabric. The colours are permanently dyed into the fabric (not printed or pressed on the surface of the fabric like some inferior products) so it's very durable and will keep looking good for a long time. Unlike older, inferior methods, it is not possible to digitally dye white or other colours onto previously dyed (coloured) fabric - any areas in which custom content is required (logo, text, photo, etc.), OR areas which require a background colour that's not plain white, must be custom dyed. We use the latest technology instead of old-school production methods, and as a result the number of printed colours or coverage does not affect the price - 1 colour content is the same price as 4 colour photographic content!
We also offer several options and accessories for Promo Flags, to add to the basic display as you require. Choose from steel cross base floor stands, ground sleeves, 24" extension poles, deluxe carrying bags, water weight bag to suit your specific requirements.
Graphic Setup (design, layout, and proofing) work is extra charge if required. For customer-supplied design final artwork no extra charges apply if it's professionally built into our design template (you'll be emailed this once your order is placed).