The Collage’s multi-panel, 3 dimensional design makes your trade show display stand out, and provides incredible versatility in a portable display.

It uses an aluminum pop-up scissor frame with magnetic locks that just “snap” together so the frame sets up in about 5 seconds.  The changeable fabric graphic panels are held onto the frame by grommets in each corner, and also take just seconds to display on the frame.  To attach the graphics, you just hook each grommet hole in the fabric graphic onto pegs on the frame. The special stretch fabric expands as it is tensioned so wrinkles in the fabric disappear!

The innovative fabric we use is not plain spandex. It's environmentally-friendly (88% recycled polyester/12% spandex) and flame-retardant (so it meets fire code regulations in exhibit halls). The graphic panels can easily be changed without tools so you can have a different look and content for various audiences.

The aluminum frame gives a high-tech feel to the display so you might want to choose a fabric graphic panel configuration which leaves parts of the frame visible. Or other panel alternatives can pretty much cover the aluminum frame if you choose. Note that since the fabric graphic panels stretch, there is some minor image distortion especially near the edges of the fabric graphic panels. This generally isn't a problem and actually is part of the Collage's unique look.

Collage can be purchased in a wide range of sizes and graphic configurations, generally described using the number of "squares" in the display frame. Each "square" is approximately 29" wide, by 29" high. So, for example, a Collage 2x3 would have 2 squares by 3 squares for a total of 6 squares which can be filled with fabric graphic panels. You could choose either 6 separate 1x1 size fabric graphics (which each fill a single square area), or any combination of 1x1's, 1x2's, 2x2's, or 2x3's to cover the display.

All fabric graphic panels are permanently digitally dyed in high resolution with whatever content you want - even full colour images. The extended-life dyes are washable and fade-resistant even for outdoor use.

Collage's versatility comes from many sources. The fabric graphics can be mounted over the front of the frame, or on both sides for a double-sided display. They can be angled in a variety of ways to make sails, kites and other interesting visual effects. You can have many small fabric panels, or combine small panels with large panels to suit your content. Collage frames can also be displayed in any orientation you want - portrait, landscape, or even diagonal in the case of the Collage Kite models!  

This complete display collapses down to an incredibly small and lightweight size. It transports and stores neatly in its high quality lockable, foam-lined aluminum carrying case with carrying handle. Even for the largest Collage model (4x3) the case measures just 33" x 9.5" x 8", and the frame with case weighs just 11kg. The fabric graphic panels usually slip in the case as well, or they can ship with other luggage to the show. You don't need to worry about wrinkles, since they disappear as the fabric stretches over the display!

Standard pricing for Collage display graphics includes any combination of graphic panels which cover the entire display with a single “layer” of graphics.  Graphic panels which overlay another (i.e. a second “dimension” of graphics) are available at extra cost as shown below.

Specifications:

"Collage" tension fabric pop-up display:

- frame: lightweight aluminum scissor frame with magnetic frame locks and user-replacable plastic hubs
- fabric graphic panels: 5.9oz. 88% recycled polyester/12% spandex (wrinkle-resistant, flame retardant - passes NFPA 701 Small Scale & California Reg#F-50001) fabric, digitally dyed with extended life dyes, special stretch hems (which won't break when stretched) sewn all around, with nickel grommets in corners and at all outside hub locations.

Graphics / Content:
- all fabric graphic panels are digitally dyed (foreground and background) with any content you want (even full colour) into fabric that starts off white.

Fabric Graphic Panel Sizes:
• 1x1 = 29.5" wide x 29.5" high
• 1x2 = 29.5" wide x 58" high
• 1x3 = 29.5" wide x 86.5" high
• 2x1 = 58" wide x 29.5" high
• 2x2 = 58" wide x 58" high
• 2x3 = 58" wide x 86.5" high
• 2x4 = 58" wide x 115" high
• 3x1 = 86.5" wide x 29.5" high
• 3x2 = 86.5" wide x 58" high
• 4x1 = 115" wide x 29.5" high
• 4x2 = 115" wide x 58" high

A listing of all Collage models and order numbers (SKU's) are at the bottom of this page.

Attaching the fabric graphics panels takes just seconds! You simply slip the grommet holes onto the frame tabs, and the resulting stretch takes any wrinkles out of the fabric. The panels look crisp and taught - exhibit viewers will never know how easy it was to set up!.

When you expand the pop-up scissor frame, the Magnetic Frame Locks automatically connect to each other, securely locking the frame in a single step. To release the locks when taking down the display, you simply give the frame a sharp outward snap to release these magnetic frame locks..

Collage Frames come in a high quality lockable, foam-lined aluminum carrying case. The whole display (in most cases even the fabric graphic panels) fits in this case. It's hard to believe a large backwall display could be so compact!