|
|
|
SpringX 23-1/2" x 62" x-frame spring back banner stand
The SpringX is an economical, yet stylish choice that suits many display situations. It's simple x-frame tension design effectively displays any banner which has grommet holes in the corners, by applying consistent tension on all four corners.
Its black plastic x-frame with chrome finish accents is slim, stylish, and almost invisible when viewed from the side.
The spring back design of the SpringX means that you have to unroll the banner graphic and attach it onto the spring arms in order to set up the banner stand. But the set up is easy and doesn't require any tools. To display a banner, you simply connect each of the four spring rods into the chrome "x shaped" hub, then slip the grommet holes on each corner of the banner over the pins on each spring back arm, then tighten the chrome finish thumb screw to lock the banner in place. Then attach the support base, and you're done!
The SpringX is ideal for customers who need to keep to tight budgets and require a stylish, simple, light duty banner stand for occasional use - it's not made for heavy duty, regular use. And it comes complete with a soft carry bag for storage and transportation (needs further protection for courier/plane shipping, though).
Please note that the SpringX can not be used with the Banner Light.
Specifications:
Product Item #: #BSspringx banner stand w bag (banner graphic not included - order using separate item number below)
Complete Display Size when set up: 29" wide x 71" high x 17" deep
Graphic Visual Size when set up: 23-1/2" wide x 62" high
Rolled up Transport Size: approx. 44" wide x 5" high x 3" deep
Available Finishes: black plastic with chrome finish metal accents
Weight: approx. 3.3 lbs. (1.5kg) including banner graphic and bag
Available Banner Graphics:
- #VBspringx Vinyl Banner for SpringX (23-1/2" wide x 62" high): digitally printed lay-flat, flame-retardent vinyl banner
- #FBspringx Fabric Banner for SpringX (23-1/2" wide x 62" high): digitally dyed flame-retardent, wrinkle-resistant 100% polyester fabric
|
|
 |
|
|
|
 |
|
 |
|
 |
|
|
The banner is held tight by pins on each spring rod which go through grommet holes in the corners of the banner, it's then locked with thumb screws |
|
The slim profile of the X-Stand makes it almost invisible from the side view |
|
A lightweight nylon soft bag provides basic protection and easily transports the stand and banner |
|
The spring rods easily insert into the central metal hub, making assembly a breeze |
|
The back support base connects to the lower spring rods |
|
|
|
