LBanner24: 24" wide x up to 79" high spring-back banner stand The LBanner24 is a simple, lightweight, economical banner stand which sets up easily, displays banners up to 79"high, and is economically priced so it's suitable for large volume purchases. It's "L" shape spring-back design effectively displays a banner that's 24" wide by 79" high. Plus, the LBanner24 is unique in that you can display a shorter 59" high banner just by not using one of the support rods in the spring back of the stand. At the shorter height, you can display the LBanner24 on an exhibit table top, or have two or three side by side to create a small backwall. The spring-back design of the LBanner24 means that you have to unroll the banner graphic and attach it onto the spring-back support rod in order to set up the banner stand. But the set up is easy and doesn't require any tools. It's extremely light and easy to carry at only1.98lbs. (0.9kg) including banner graphic and bag. To display a banner, you simply pop the plastic end caps off one end of the top and bottom horizontal rails, slide the banner graphic (already attached to the top and bottom rails) through the clip at the top rod and bottom foot of the stand, slip the spring-back support rods together and you're done! The LBanner24 is ideal for customers who need to keep to tight budgets and require a good size, simple, light duty banner stand for occasional use - it's not made for heavy duty, regular up/down use. It's also great for volume purchases where you can economically get many of these stands set up in widespread retail locations. It comes complete with a soft carry bag for storage and transportation (needs further protection for courier/plane shipping, though). The LBanner24 can be used with optional banner stand lights. Specifications: Product Item #: #BSlban24 LBanner24 spring-back banner stand (banner graphic not included - order using separate item number below) Complete Display Size when set up: 24.75" wide x 80" high x 18" deep (62 x 200 x 45cm) Graphic Visual Size when set up: 24" wide x 79" high (60 x 198cm) Rolled up Transport Size: approx. 44.5" wide x 4.5" high x 2.5" deep (111 x 11.25 x 6.25cm) Available Finishes: black plastic with chrome finish accents Weight: approx. 1.98lbs. (0.9kg) including banner graphic and bag Available Banner Graphics: standard size 79" high - #VBlban24-79 Vinyl Banner for LBanner24 - 79" high (24" wide x 79" high): digitally printed lay-flat, fire-retardent vinyl banner - #FBlban24-79 Fabric Banner for LBanner24 - 79" high (24" wide x 79" high): digitally dyed flame-retardent, wrinkle-resistant 100% polyester fabric smaller size 59" high - #VBlban24-59 Vinyl Banner for LBanner24 - 59" high (24" wide x 59" high): digitally printed lay-flat, fire-retardent vinyl banner - #FBlban24-59 Fabric Banner for LBanner24 - 59" high (24" wide x 59" high): digitally dyed flame-retardent, wrinkle-resistant 100% polyester fabric
The versatile LBanner24 can also display a shorter 59" high banner by simply not using one of the upright support rods. This makes it great for table-top display or for smaller environments The sturdy weighted foot makes this lightweight banner stand quite stable A lightweight nylon soft bag provides basic protection and easily transports the stand and banner The banner adheres onto a stifferner strip which slides into the top rail, giving a clean and simple appearance