iBanner 920 35" x 78-3/4" spring back banner stand The iBanner 920 is our most affordable banner stand. Its functional design displays a large banner graphic with ease, and allows the banner graphic to be changed if necessary. The iBanner is ideal for customers who need to keep to tight budgets and require a banner stand for limited use only. Its black plastic components slide together easily without tools. The banner graphic is made with pockets at the top and bottom which allow it to slip around the top and bottom horizontal rods, with a center curved spring back providing tension to the banner. A weighted support foot adds stability to the display, however this banner stand is so light weight that care needs to be taken especially on carpeting so that it doesn't tip. The iBanner 920 comes with a lightweight nylon carrying bag for easy transportation and storage (not designed to protect the banner stand during shipping). Specifications: Product Item #: #BSiban920 (banner graphic not included - order using separate item number below) Graphic Visual Size when set up: 35" wide x 78-3/4" high Rolled up Transport Size: approx. 38" wide x 5" high x 5" deep Available Finishes: black plastic Weight: approx. 6 lbs. (2.75kg) including banner graphic Available Banner Graphics: - #VBiban920 Vinyl Banner for iBanner 920 (35" wide x 78-3/4" high): digitally printed lay-flat, fire-retardent vinyl banner
The upright support rod grips around the top rail to hold it secure A pole pocket at the top and bottom of the banner make changing banner graphics easy The 3 pieces which make the upright support rod simply slide together for assembly A weighted support foot adds stability to the display