|
|
|
DOUBLE-SIDED, USER CHANGEABLE BANNER
Excalibur2 - 31.5
31-3/8" x 82.85" double-sided easy change roller-retractable banner stand
The Excalibur2 is one of the most feature-rich premum roller-retractable banner stand available, with a combination of functionality, style, reliability and price that is hard to beat. This model offers pretty much every feature currently available in banner stands, at a price that's lower than comparable premium level banner stands.
The Excalibur2 is a roller-retractable type of banner stand, so to put it on display you simply pull up the banner out of the base and hook it onto the telescoping support pole. To take it down, you just let the banner roll itself back into the base. This model also features twin roller mechanisms, so for times when you want to display a second banner back-to-back with the front one - the Excalibur 2 is ready!
In addition, the Excalibur2 incorporates an easy-change banner system which makes it easy for you to change the banner graphic. Each banner is supplied with a thin plastic strip adhered to the top and bottom of the banner. The strip on the bottom of the banner just slips into a slide-in channel in the base and the strip on the top of the banner slides in the top rail of the stand. So you just slide the old banner out, and slide the new banner in - it's simple and very easy. Most other roller-retractable models are difficult (if not impossible) to change by the end user, but the Excalibur2 makes it easy.
The Excalibur2 also has a number of features which make it a pleasure to use. Useful features like:
- a telescoping twist and lock centre support pole with height markings makes it easy to raise the banner to it's full height, or let you display a shorter banner on a table top
- integrated storage of support poles and allen key under the base of the stand, so you don't misplace these parts
- ratchet tensioner on the sides of the base allow the user to easily adjust the tension of the roller mechanism if it needs adjustment
- tinted charcoal grey plastic end caps neatly cover the roller mechanisms of the base ends, and they lock in place using magnetic force
- beautiful, functional foam padded protective case keeps the stand secure during transportation and storage, and it's integrated handle and shoulder strap make it easy to carry
The Excalibur2's substantial base provides a visually clean, impressive appearance without requiring an additional support foot. It fits particularily well in corporate foyers, trade show or conference environments, and hotel or restaurant lobbies. This banner stand is manufactured using top quality extruded aluminum components, and has an anodized silver aluminum finish, to look right in any environment.
The Excalibur2 - a premium feature-rich double-sided banner stand with a price you can handle.
Specifications:
Product Item #: #BSnexc231.5 Excalibur2 (banner graphic not included - order using separate item number below)
Graphic Visual Size when set up: 31 - 3/8" wide x 82.85" high (79x213cm)
Shipping Size: approx. 35.5" wide x 5.5" high x 12" deep (89x14x30cm)
Shipping Weight: approx. 18.7 lbs. (8.5 kg) plus approx. 1.1 lb (.5kg) for each banner graphic
Available Banner Graphics:
- #VBnexc31.5 Vinyl Banner for New Excalibur2 - 31.5 (31.4375" wide x 82.85" high visible size): digitally printed lay-flat, flame-retardant vinyl banner
- #FBnexc31.5 Fabric Banner for New Excalibur2 - 31.5 (31.4375" wide x 82.85" high): permanently dyed flame-retardant, wrinkle-resistant 100% polyester knit fabric
Popular Accessories:
- #DLbl35 BannerLight35: 35w halogen light for banner stand (clamps onto vertical support pole of banner stand)
|
